Synchronous Machine Models

From Open Electrical
Revision as of 13:42, 16 November 2020 by Jules (talk | contribs)
Jump to navigation Jump to search

This page describes the most common synchronous machine models used in stability studies.

Nomenclature

The standard machine parameters are defined as follows:

  • is the armature resistance (pu)
  • is the armature reactance (pu)
  • is the d-axis synchronous reactance (pu)
  • is the q-axis synchronous reactance (pu)
  • is the d-axis transient reactance (pu)
  • is the q-axis transient reactance (pu)
  • Failed to parse (Conversion error. Server ("https://wikimedia.org/api/rest_") reported: "Cannot get mml. Server problem."): {\displaystyle X''_{d}\,} is the d-axis subtransient reactance (pu)
  • is the q-axis subtransient reactance (pu)
  • is the d-axis transient open loop time constant (s)
  • is the q-axis transient open loop time constant (s)
  • is the d-axis subtransient open loop time constant (s)
  • is the q-axis subtransient open loop time constant (s)
  • is the machine inertia constant (MWs/MVA)
  • is an additional damping constant (pu)

Note that per-unit values are usually expressed on the machine's MVA base.

6th Order (Sauer-Pai) Model

6th order synchronous machine model based on the book:

Sauer, P.W., Pai, M. A., "Power System Dynamics and Stability", Stipes Publishing, 2006

Stator magnetic equations:

Failed to parse (Conversion error. Server ("https://wikimedia.org/api/rest_") reported: "Cannot get mml. Server problem."): {\displaystyle {\dot {\psi ''_{q}}}={\frac {1}{T''_{q0}}}\left[-E'_{d}-\psi ''_{q}-(X'_{q}-X_{a})I_{q}\right]\,}

where

Stator electrical equations (neglecting electromagnetic transients):

Equations of motion:

Initialisation:

Failed to parse (Conversion error. Server ("https://wikimedia.org/api/rest_") reported: "Cannot get mml. Server problem."): {\displaystyle V_{d0}=|{\boldsymbol {V}}_{t0}|\sin(\delta _{0}-\theta _{0})\,}
Failed to parse (Conversion error. Server ("https://wikimedia.org/api/rest_") reported: "Cannot get mml. Server problem."): {\displaystyle E'_{q0}=V_{q}+X''_{d}I_{d0}+R_{a}I_{q0}+(1-\gamma _{d1})(X'_{d}-X_{a})I_{d0}\,}
Failed to parse (Conversion error. Server ("https://wikimedia.org/api/rest_") reported: "Cannot get mml. Server problem."): {\displaystyle V_{fd0}=E'_{q0}+(X_{d}-X'_{d})\left(I_{d0}-\gamma _{d2}\psi ''_{d0}-(1-\gamma _{d1})I_{d0}+\gamma _{d2}E'_{q0}\right)\,}

6th Order (Anderson-Fouad) Model

6th order synchronous machine model based on the book:

Anderson, P. M., Fouad, A. A., "Power System Control and Stability", Wiley-IEEE Press, New York, 2002

Stator magnetic equations:

Failed to parse (Conversion error. Server ("https://wikimedia.org/api/rest_") reported: "Cannot get mml. Server problem."): {\displaystyle {\dot {E'_{q}}}={\frac {1}{T'_{d0}}}\left[V_{fd}-(X_{d}-X'_{d})I_{d}-E'_{q}\right]\,}

Stator electrical equations (neglecting electromagnetic transients):

Equations of motion:

Initialisation:

Failed to parse (Conversion error. Server ("https://wikimedia.org/api/rest_") reported: "Cannot get mml. Server problem."): {\displaystyle I_{q0}=|{\boldsymbol {I}}_{a0}|\cos(\delta _{0}-\phi _{0})\,}
Failed to parse (Conversion error. Server ("https://wikimedia.org/api/rest_") reported: "Cannot get mml. Server problem."): {\displaystyle V_{d0}=E''_{d0}+X''_{q}I_{q0}-R_{a}I_{d0}\,}

4th Order (Two-Axis) Model

Stator magnetic equations:

Failed to parse (Conversion error. Server ("https://wikimedia.org/api/rest_") reported: "Cannot get mml. Server problem."): {\displaystyle {\dot {E'_{q}}}={\frac {1}{T'_{d0}}}\left[V_{fd}-(X_{d}-X'_{d})I_{d}-E'_{q}\right]\,}

Stator electrical equations (neglecting electromagnetic transients):

Equations of motion:

Initialisation:

Failed to parse (Conversion error. Server ("https://wikimedia.org/api/rest_") reported: "Cannot get mml. Server problem."): {\displaystyle V_{d0}=|{\boldsymbol {V}}_{t0}|\sin(\delta _{0}-\theta _{0})\,}

2nd Order (Classical) Model

Stator equations:

Failed to parse (Conversion error. Server ("https://wikimedia.org/api/rest_") reported: "Cannot get mml. Server problem."): {\displaystyle V_{d}=X'_{d}I_{q}-R_{a}I_{d}\,}

Equations of motion:

Initialisation: